| Customization: | Available |
|---|---|
| Type: | IVD Reagent |
| Certificates: | ISO13485//Cfda |
|
Still deciding? Get samples of US$ 4/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Application
The test is used to obtain visual qualitative result and is intended for healthcare professionals use including professionals at point of care sites toassist in the determination of drug compliance
Singclean Advantages
Accurate results:
More than 99% accurate,according to international drug abuse monitoring standards;
Good specificity:
Select monoclonal antibody with high specificity to minimize possible crossover;
Easy to operate:
Do not need any equipment and additional testing; Samples are easy to collect and canbe tested on site;
Fast detection:
5 minutes to interpret the results,saving time;
Joint testing:
Multiple drugs can be screened at once.
| Format | Test midstream/Test Cube/Test cassette |
| Cassette Format | Customized, up to 6 panelspanel format: up to 16 panels |
| Cup Format | up to 18 panels |
How much sample do I need?
Test midstream
1. Remove the test midstream from the foil pouch by tearing at the notch.
2. Remove the midstream cap, insert the sponge top into the mouth. Actively swab the inside of the mouth and tongue to collect saliva until the control line appears, then immediately lay the test kit on a flat surface.
3. Read the drug test results at 10 minutes.
Read the alcohol test result at 2 to 5 minutes. (If alcohol is included)
Test Cube
1. Remove the test cube and the sponge collector from the foil pouch by tearing at the notch. Place the test cube upright on a level surface.
2. Put the sponge end of the collector in your mouth to collect the saliva sample until the sponge is fully saturated.
3. Open the test cube and place the fully saturated sponge collector inside the test cube. Press the sponge collector down firmly until it reaches the bottom of the test cube, then close the cube lid tightly while compressing the collector. Keep test cube upright on flat surface. Make sure the sponge collector is inserted vertically and the handle of collector is put into the clamp.
4. Interpreting Drug Test Results: Read results at 10 minutes.
Test cassette
1.Remove sponge from Saliva Collector.
2.Insert the sponge end of the collector into the mouth. Actively swab the inside of the mouth and tongue to collect saliva for 3 min until the sponge becomes fully saturated. No hard spots should be felt on the sponge when saturated.
3.Open the top of the collection chamber then remove the saturated salvia collector from the mouth and place it into the collection chamber Press the sponge fully against the strainer to extract as much saliva possible into the collection chamber.
4.Unscrew the collector cap and add 3d saliva to the sampling hole.Read the drug test results at 10 minutes. Read the alcohol test result at 2 to 5 minutes. (If alcohol is included)
Test Procedure
Test midstream
1. Remove the test midstream from the foil pouch by tearing at the notch.
2. Remove the midstream cap, insert the sponge top into the mouth. Actively swab the inside of the mouth and tongue to collect saliva until the control line appears, then immediately lay the test kit on a flat surface.
3. Read the drug test results at 10 minutes.
Read the alcohol test result at 2 to 5 minutes. (If alcohol is included)
Test cassette
1.Remove sponge from Saliva Collector.
2.Insert the sponge end of the collector into the mouth. Actively swab the inside of the mouth and tongue to collect saliva for 3 min until the sponge becomes fully saturated. No hard spots should be felt on the sponge when saturated.
3.Open the top of the collection chamber then remove the saturated salvia collector from the mouth and place it into the collection chamber Press the sponge fully against the strainer to extract as much saliva possible into the collection chamber.
4.Unscrew the collector cap and add 3d saliva to the sampling hole.Read the drug test results at 10 minutes. Read the alcohol test result at 2 to 5 minutes. (If alcohol is included)
Test Cube
1. Remove the test cube and the sponge collector from the foil pouch by tearing at the notch. Place the test cube upright on a level surface.
2. Put the sponge end of the collector in your mouth to collect the saliva sample until the sponge is fully saturated.
3. Open the test cube and place the fully saturated sponge collector inside the test cube. Press the sponge collector down firmly until it reaches the bottom of the test cube, then close the cube lid tightly while compressing the collector. Keep test cube upright on flat surface. Make sure the sponge collector is inserted vertically and the handle of collector is put into the clamp.
4. Interpreting Drug Test Results: Read results at 10 minutes.
Interpretation of Results:
POSITIVE
Only one colored band appears in the control region (C). No apparent colored band appears in the test region(T). The absence of a line in the test region (T) indicates a positive result. The positive result indicates that the drug concentration in the urine specimen is above the designated cut-off level for that specific drug.
Note: The samples with positive results should be confirmed with a more specific method.
NEGATIVE
Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region (T). The negative result indicates that the drug concentration in the urine specimen is below the designated cut-off level for that specific drug.
INVALID
The control band fails to appear. Results from any test which has not produced a control band at the specified reading time must be discarded. Please review the procedure and repeat it with a new test. if the problem persists, discontinue using the kit immediately and contact your local distributor.
Test Limitations
1. Failure to use this kit as directed may result in an insufficient sample or an inaccurate screening result.
2. The possibility exists that substances and factors not described in this instruction may interfere with the test, causing false results (e.g. technical or procedural error).
3. This test provides a screening result t is not designed to determine the actual concentration of a drug or the level of intoxication.
){kind=link}